South Asia
Home > Our Services > Certification > Product Certification > Electrical and Electronic Product Certification > South Asia
Nepal Telecommunication Authority (NTA for short), formulated the regulations in 1997 for the imported telecommunication and radio products. Such products now must be certified before entering the Nepal market.
Nature of certification: mandatory
Validity of certificate: 1 year
Local test: no
Local representative: yes
Certification mark: none
Module certification: not allowed
Renewal of certificate: The application must be made 30 days before the expiry date of certificate.
Technical requirements for TELECOM products:
Specific Absorption Rate:The handset shall have the SAR standard of maximum 2 W/Kg, averaged over 10 gm of tissue.
Min. Receiver Sensitivity:-102 dBm
Maximum EIRP: Maximum EIRP:33+/-2 dBm
Minimum Charging Capacity of Battery:
600 mAh (for Bar Phone, i.e. Normal Keypad phone)
1000 mAh (for Smart Phone)
Technical requirements for 2.4GHz and 5GHz products:
For more information, please contact BALUN.
Introduction of BIS(Compulsory Registration Scheme of Information Technology and Electronic Products(CRS))
On September 7, 2012, the Ministry of Electronics & Information Technology of India (MeitY) promulgated the Electronic and Information Technology Products (Compulsory Registration Scheme) Decree, 2012. This decree stipulates that the products must meet the requirements of the relevant standards of the Decree and obtain the certification before entering India. So far, more than 50 types of products have been included in the compulsory certification registration range. All products listed in the compulsory product catalogue must be registered in the Bureau of Indian Standards (BIS) for export to India or for sale in the Indian market.
BIS-CRS Registration Procedure
Submit the test application in the BIS official website -Indian laboratory approved by BIS accepts the test request - Submit test materials - The laboratory carries out a test and issues a test report - Submit the test report and relevant registration materials -BIS reviews them - Complete the registration and obtain the registration number and the certificate
BIS-CRS certification logo---Standard Mark
Either of the above two forms should be printed on the product body and packaging,IS stands for Indian test standard for products
R stands for the registration number obtained after registration is completed
Questions & Answers:
Who are the applicant and the certificate holder? -----Factory
Is factory inspection required? -----No
Is local test required? -----Yes
Is CB report accepted? -----No
Is local representative required? -----Yes
How long is R-Number valid? --2 years, R-number renewable after 2 years (2-5 years optional)
Documents list: Business license (including business scope), operating manual, circuit schematic diagram, PCB Layout, label, trademarkcertificate and so on
Application Type of BIS Certification:
(1) New grant/New application (new application of R-number)
(2) Inclusion application (application of new model or trademark for the product with R-Number)
(3) CCL updates the list of components (application for addition or change of key components for the product with R-Number)
(4) Certificate renewal (Certificate expires)
In 1955, ISI (Indian Standards Institution) certification was implemented, mainly on a voluntary basis.
In 1987, the BIS (Bureau of Indian Standards) was established, replacing the ISI (Indian Standards Institution), and was responsible for product certification. ISI certification is also known as BIS certification.
On January 28, 2004, the Indian government released an official notice, stipulated that all imported products belonging to one of 109 kinds of products for BIS compulsory import certification (mainly including bulk consumer goods and products related to energy conservation and consumer safety and health, such as: food additives, mineral oil, milk powder, milk, baby milk products, cement, etc.) cannot be sold in the market until the foreign producers or Indian importers applied BIS certification and obtain the ISI certificate.
BIS(ISI) Certification Procedure
Prepare relevant documents (such as business license, list of equipment produced by the factory, etc.) and submit them to BIS
BIS will arrange relevant officials for the factory inspection after the documents are verified
Indian authorized laboratory carries out tests and submit the test reports to BIS
BIS issues the certificate after reviewing the documents
BIS(ISI) Certification Logo
Questions & Answers:
Who are the applicant and the certificate holder? -----Factory
Is factory inspection required? -----Yes
Is local test required? -----Yes
Is CB report required? -----No
Whether local representative is required? -----Yes
Validity period of certificate -----1-2 years; after the certificate expires, it can be renewed. The validity period of the renewed certificate is 1-5 years.
WPC, Wireless Planning & Coordination, is Wireless Planning Bureau of India. In order to effectively control the use of radio frequency spectrum in wireless communications, the Indian Government has set up WPC-a special regulatory body. All de-licensed wireless products must be approved by WPC before entering the Indian market. WPC will issue an ETA certificate (Equipment Type of Approval (ETA) certificate).
WPC ( Equipment Type of Approval) Certification Procedure
Submit the RF report (issued by the qualified lab) and related authorization materials to WPC
Pay for WPC fees
WPC reviews the materials---- issues the certificates
Requirements for Certification Logo:
None
Questions & Answers:
Is local test required? ----No, just provide RF report of the product which includes the following contents.
(1) Measurement of peak radiated power or EIRP.
(2) Measurement of peak power spectral density.
(3) Measurement of 6dB and 20dB. bandwidth.
(4) Measurement of frequency range and details of channels.
(5) Measurement showing behavior of edge channels.
(6) Measurement of spurious/harmonic emissions (conducted and radiated) in different frequency band.
(7) Other details such as peak excursion, measurement uncertainty, test set up, details of power settings facility etc.
(8) Details of antenna systems compatible to be used with the device under test.
Is factory inspection required?----No
Do you need a local representative? -----Yes
How long is WPC (Equipment Type of Approval) certificate valid? -----The certificate is in permanent validity, but the local actual importer should apply for separate Import Permission for each batch of shipment.
What documents does the importer need to apply for Import Permission?
(1)WPC certificate number
(2)Cargo transport port, export quantity, shipment order number, etc.